ITC – TS-9120 Long-distance Driver
| Brand Name: | ITC |
| Part Number: | TS-9120 |
| Product Type: | ITC – TS-9120 Long-distance Driver |
| Specification: | Please refer to the Datasheet on the Manufacturer’s Datasheet |
| Warranty: | Manufacturer Standard Warranty |
Description
ITC – TS-9120 Long-distance Driver
Details:
ITC – TS-9120 Long-distance Driver
Description:
Support signal formats: RGBHV, RsGsBs, YPbPr/YCbCr.
- Support the video signal brightness and sharpness, the front segment adjustable pre emphasis.
- Support (pixel band wide) @-3dB 400M bandwidth. All outputs the perfect support for Full HD 1920×1200@60Hz or 1920x1080p@60Hz.
- Support for the ideal reduction maximum transmission distance is 120 meters (1024×768@60).
- HV input impedance select button, select 510R or 75R input matching.
Specification:
| Model | TS-9120 |
| Video input | |
| Interface | 15-pin HD female interface |
| 1Vpp component video or Y and composite video in S-video; | |
| Signal strength | 0.7Vpp RGB (computer signal); 0.3Vpp component video |
| Cb/Cr or Pb/Pr, C in S-video | |
| Min/max level | Analog signal: 0.5V ~ 2.0Vpp |
| Impedance | 75 Ω |
| Return loss | -30dB@5MHz |
| Genlock | 0.3V-0.4Vpp |
| Maximum DC offset error | 15mV |
| Long-line driver interface part video | |
| Gain | Minimum 0.2dB (0~10MHz bandwidth) |
| Maximum 1.8dB ((0 ~ 10MHz bandwidth) | |
| Minimum 0.4dB (10M ~ 400MHz bandwidth) | |
| Maximum>6dBÂ (10Â ~Â 400MHz) | |
| Differential phase error | <2.0 degrees, 3.58MHz (only when the compensation file below 40 meters) |
| Differential gain error | 0.3%, 3.58-4.43MHz (only when the compensation file below 40 meters) |
| Maximum transmission delay | 5nS(±1nS) |
| Signal type | RGBHV,RGBS,RGsB, RsGsBs,YPbPr/YCbCr, |
| S-Video, composite video signal (CVBS) | |
| Long-line drive part of the video output | |
| Interface | BNC female interface |
| Min/max level | Analog signal: 0.5V ~ 2.0Vpp |
| Impedance | 75 Ω |
| Return loss | -30dB@5MHz |
| DC compensation | Maximum ±5mV |
| Sync signal | |
| Input/output type | RGBHV, RGBS, RGsB, RsGsBs |
| Input level | 0.5V- 5.0Vpp,: 4.0Vpp normal |
| Output level | AGC-TTL: 5Vpp, unloaded (unterminated) |
| Input impedance | 510 Ω / low impedance optional |
| Output impedance | 75 Ω (monitoring output interface part); |
| 75 Ω (long-distant driver output interface part) | |
| Polarity | Positive or negative (exactly consistent with the input) |
| Control type | |
| Method | Manually select each file, subject to subjective feelings. |
| Specification | |
| Input power | DC 9V 1.5A |
| Operating temperature | -20℃~ +70℃ |
| Environment humidity | 20%～80% relative humidity, no condensation |
| Installation | Hanging installation |
| Dimension (LxWxH) | 163x152x32mm |
No more offers for this product!
General Inquiries
There are no inquiries yet.
Reviews
There are no reviews yet.