ITC – VA-6200MA Voice Alarm Controller
Brand Name:Â | ITC |
Part Number: | Â VA-6200MA |
Product Type:Â | ITC – VA-6200MA Voice Alarm Controller |
Specification: | Please refer to the Datasheet on the Manufacturer’s Datasheet |
Warranty: | Manufacturer Standard Warranty |
Description
ITC – VA-6200MA Voice Alarm Controller
DETAILS:
ITC – VA-6200MA Voice Alarm Controller
Descriptions:
Intelligent Public Address and Voice Alarm system is the organic combination of computer network technology, communication technology, information technology and so on. It is a combination of related voice alarm system. Through the PC management software, you can do system function customization and control, automatic completion of the system physical zone status monitoring and management, automatic completion of the terminal equipment monitoring and management. It is mainly used in intelligent residential quarters, shopping malls, shopping centers, and buildings such as voice alarm and background music.
Features:
- Support automatically monitoring the working condition of the each zone speaker loop (open circuit, short circuit).
- 8-channel trigger input and output interface, it can trigger the pre-programmed language information to the specified partition or (trigger) corresponding to the external power supply to achieve the corresponding event warning.
- The connection uses the standard RJ-45 network port and CAT-5 cable transmission
- With a TCP / IP communication interface to support the basic Window platform visual interface operation, the state automatically synchronized.
- Support 24V DC power supply.
- With the monitor function of power amplifier.
- Built-in recording function, no need external equipment.
- With system failure, emergency dry contact output, emergency reset dry contact input.
- The partition output with three-wired, four-wired relay function.
- With one IP address reset port.
Specifications:
Model | VA-6200MA |
Power output | 500W |
Output voltage | 100V |
MIC1-2 input distortion | <1% (rated output power), 1KHz |
MIC1-2 input frequency response | 80Hz~20KHz |
MIC1-2 input sensitivity | 5mV/600Ω |
MIC1-2 input SNR | >65dB |
AUX3-6 input distortion | <1% (rated output power), 1KHz |
AUX3-6 input frequency response | 80Hz~20KHz |
AUX3-6 input sensitivity | 350mV/10kΩ |
AUX3-6 Input SNR | >70dB |
Emergency microphone | Emergency microphone |
Sensitivity | 10mV |
Impedance | 600Ω |
Standby amplifier input | 100V |
Standby amplifier audio output | ±385mV (balanced output) |
Alarm input | 8 channel |
Alarm Output | 8 channel |
Partition output | 8 channel |
24V relay output | 8 channel |
Short circuit mode | No voltage, short connection |
Level mode | Require external 10K and 4.7K resistors |
Cooling method | Air-cooled |
Protection mode | Delay / over temperature / short circuit / overload |
Output volume adjustment | 6 |
Built-in MP3 capacity | 16G |
Format | MP3 |
Slave Controller Communication | RS485 bus |
Slave Controller | Support 19 slave controllers |
Remote MIC communication | CAN bus |
Remote MIC | Supports 32 remote MIC |
Supply voltage | ~ 220V-240V, 50/60Hz |
Maximum current | 3A |
Fuse specifications | 250V / 5A, slow type |
Standby voltage | 24V DC, ±20% |
Maximum current | 30A |
Maximum power consumption | 600W |
Dimension (L x W x D) | 484 x 88 x 353mm |
Weight | About 10.8kg |
Installation method | Desktop or 19″ cabinet |
Additional information
Power (Mega Watt) | 120 MW, 240 MW, 350 MW, 500 MW |
---|
General Inquiries
There are no inquiries yet.
Reviews
There are no reviews yet.