RUIJIE- 24-Port Gigabit Layer 2 Non-PoE Switch
ر.س1,984.00 + VAT
Brand Name: | RUIJIE |
Part Number: | RG-NBS3100-24GT4SFP-P |
Product Type: | RUIJIE- 24-Port Gigabit Layer 2 Non-PoE Switch |
Specification: | Please refer Datasheet on Manufacturer Website |
Warranty: | Manufacturer Standard Warranty. |
86 in stock
Description
RUIJIE– 24-Port Gigabit Layer 2 Non-PoE Switch
Details:
RUIJIE– 24-Port Gigabit Layer 2 Non-PoE Switch
Product Description:
24-Port Gigabit L2 Managed POE Switch 24 Gigabit RJ45 POE/POE+ Ports, 4 SFP Slots 370W PoE power budget 19-inch Rack-mountable Steel Case Switching capacity: 336Gbps Packet forwarding rate: 42Mpps Port mirroring. The RG-NBS3100-24GT4SFP-Pswitch is a classAproduct. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. The high temperature label indicates that the device should be installed in the restricted area when the ambient temperature exceeds 50 degree C.
Highlight Feature:
- 24-Port Gigabit L2 Managed POE Switch
- 24 Gigabit RJ45 POE/POE+ Ports, 4 SFP Slots
- 370W PoE power budget
- 19-inch Rack-mountable Steel Case
- Switching capacity: 336Gbps
- Packet forwarding rate: 42Mpps
- Port mirroring: Many-to-one mirroring
- Spanning tree: RSTP, STP
- MAC address: Support static MAC address, MAC address filtering
- Warranty: 3 Years.
Product Appearance:
- The switch reboots after the reset button is pressed for less than 2 seconds.
- The switch restores the default factory settings after the reset button is pressed for more than 5 seconds (until the status LED blinks).
- When the button is turnedto the left position (Mode 1), the LED indicates the switching status of the port;when the LED is solid green, it indicates that the link is up; when the LED blinks green, data is being transmitted or received.
- When the button is turned to the right position (Mode 2), the LED indicates the PoE status of ports;when the LED is solid green, it indicates that the PoE-supported ports are supplying power; when the LED blinks green, the power of the ports is overloaded.
Back Panel:
Figure 1-6Back Panel of RG-NBS3100-24GT4SFP-P
This device relies on the separate protective earthing terminal.
The device installation shall be permanently connected to building earth by a skilled person.
The device shall be intended to be used in a location having equipotential bonding(such as a telecommunication center, a dedicated computer room, or a restricted access area.
Heat Dissipation:
RG-NBS3100-24GT4SFP-Padopts fans forheat dissipation, thereby ensuring normal function of the device in the specified environment. 10 cm distancespace should be reserved at both sides and the back plane of the cabinetto allow air circulation. It is recommended to clean the device once every 3 months to avoid dust from blocking vents. Figure 1-7Flow Scheme of Heat Dissipation
Brand
Ruijie
You must be logged in to post a review.
General Inquiries
There are no inquiries yet.
Reviews
There are no reviews yet.